The AQS ELITE Gloss Enhancement Detail includes a clay bar paint decontamination process and machine polish to thoroughly clean the paint, remove light- medium swirl marks, scratches, and oxidation resulting in a significant increase in gloss and shine. You can expect a 50- 60% reduction of paint imperfections on most paints and up to 6 months of protection.
*This option is not designed to remove severe paint imperfections.
Every AQS ELITE detail begins with a thorough cosmetic inspection and consultation with the vehicle owner. The paintwork is examined for previous repairs, scratches, swirl marks, etching, oxidation, chips, dents, fallout, and etc. In addition, paint thickness readings are taken to ensure the paint system is of a healthy thickness. The interior is evaluated based on cleanliness, wear and tear, and type of upholstery (leather, vinyl, or cloth). Any issues discovered after work has started will be documented and photographed as necessary.
The wheel wells and tires are cleaned using a paint safe, degreaser. The wheel faces, barrels, and behind the spokes are cleaned using a pH balanced (non-etching) wheel cleaner and a variety of soft brushes. The wheels are rotated to ensure the areas behind the brake calipers are cleaned as well.
*Wheel off cleaning is available for an additional charge.
The door jambs, trunk jambs, and gas cap area are thoroughly cleaned using a paint safe degreaser and soft boar’s hair brush.
The car is thoroughly rinsed and pre- treated with a bug and tar remover. Then the two bucket method is used with a genuine sheep skin wash mitt and grit guard inserts. The vehicle is dried with compressed air and high quality microfiber drying towels.
*The proper products and techniques are utilized to ensure no swirl marks or scratches are introduced into the paint during the wash process.
A paint cleaner is used during the wash process to remove any industrial fallout, rail dust, or brake dust which may have accumulated over time. Vehicle manufacturer studies have shown that failure to remove these iron contaminants from your paintwork can cause premature degradation of the paint system. While clay products are useful for removing above surface contaminants, they cannot deep clean the pores of the paint. This can only be accomplished through a chemical cleaning.
The paintwork then goes through a clay bar decontamination process to remove any remaining contaminants such as fallout, sap, bug residue, overspray, road film, etc. The clay will remove any rough or bumpy feeling on the paint leaving a completely smooth and clean surface.
The paint is then machined polished to remove light scratches, swirl marks, and oxidation resulting in an increase in gloss and clarity. This process will reduce paint imperfections by approximately 50- 60% on most finishes. The sealant will protect the paint for up to 6 months.
*The proper products and techniques are utilized to ensure imperfections are removed and not temporarily covered up. Additionally, proper care is taken not to introduce any swirl marks, holograms, or buffer marks into the paint.
A water based dressing is applied to the wheel wells, tires, and trim. This dressing will not attract dirt or sling off the tire like harmful solvent based dressings. The exhaust tips are polished, a sealant is applied to the wheels, and the windows are cleaned inside and out.
After all work has been completed, a final inspection is done with the vehicle owner.